Skip to main content
#
 
cart
our twitterour facebook page pintrest youtube
Latest Posts
Archive
Categories

 Nuggets of News Blog 

Monday, February 01 2016

A drywasher is a machine that uses air, vibration, and static electricity to effectively separate gold from waste drywasher material. Modern day dry washers are like highbankers except they do not use water to recover gold. Instead of water, they use air. By forcing air to flow up through the material as it moves down the sluice, "heavies" such as gold will stay at the bottom and get trapped by riffles, while lighter material will flow over the riffles. While wet processing is nearly always faster and more efficient, especially for fine gold, drywashers are the best tool for recovering gold nuggets, pickers, and flakes from dry gravels in the desert or other areas where water is not plentiful.

Drywashers are operated by shoveling gold-bearing gravels into an upper box which is covered with a screen. The larger rocks that are too big to pass through the screen slide off. Gravel small enough to go through is fed down into the lower gold recovery box, which is an inclined trough with cross riffles much like a sluice. The bottom of the recovery box consists of a thin, light-weight porous cloth. Beneath the riffle box is a blower that pulses air up through the cloth. The vibrations and air flow, combined with the shaking and classifying action of the dry washer allows the gold to settle to the bottom where it is captured in the riffles.

With weather experts forecasting the strongest El Nino in half a century, dry washing should be very lucrative this winter. After being dry for so long, the predicted flash floods and high water events will replenish previously "worked out" areas. After all, nothing moves gold like water! Heavy rains and strong winds will cause erosion and mudslides that in turn move sands, gravel, rocks and even large boulders. The greater the volume and velocity of the water, the larger the gold and the further distance it will be moved until the water slows and the gold settles. As the fast-moving water eventually slows, "new" gold that has been unearthed will drop out of suspension and settle where it may, creating a layer of flood gold on or close to the surface. If El Nino is as strong as predicted, you'll find gold on the surface and maybe only 8 or 10 inches down, which means a lot less digging.

Following a flash flood, you’ll often see black sand on the surface because it didn’t have enough time to work its way down. This clue tells you to do a test pan. You can dry pan or carry a little water. Test panning is a good idea even if the ground itself is too wet to drywash just yet. It’s never too wet to classify and prep the material to dry out in the sun! Once the floods are over and the dirt dries out, take advantage of the conditions and get out there with a drywasher. And when you do, keep  these tips in mind:

  • The drier the better is the rule of thumb when dry washing! Moist soils and clay cause problems, so be sure to crush lumps of clay and dry your dirt in the sun (plastic tarps are ideal) before running through your dry washer. It won’t take long in the desert sun and wind. Surface soils might seem dry, but if you dig down a few inches, you may find moisture in the soil that will cause your sand, gravel, and gold to stick together. Don’t take that chance — first prep the soil so it’s very dry.
  • Metal detectors are a dry washer’s best friend! When you are moving material, a lot of the larger classifications—the small rocks half inch or larger— get kicked off to the side in the form of tailings. You want to double-check all these "throw away" rocks. Scanning them with a metal detector is a great way to ensure you're not tossing aside gold-laden rocks. Also, don't assume old tailings piles have been totally worked out. This is another time to use a metal detector because ordinary rocks could be laced with gold and completely over-looked by earlier prospectors.
  • Consider using a gold vacuum to clean out crevices in bedrock. Feed the material that you sucked up into your vacuum bucket into your dry washer.
  • Dry washing can be a very dusty process, so try to stay upwind as much as possible and wear a double filter dust mask.
  • Do a clean up every couple of hours, or after processing roughly one to two yards of material.

NOTE TO CALIFORNIA PROSPECTORS: At a time when California legislators have refused to issue suction dredge permits to miners, dry washing may soon be the only unregulated activity left in the Golden State! With the new state-wide restrictions under Senate Bill 637 on the use of high bankers and suction dredges, some prospectors are starting to find a lot of gold deposits using dry washers in the California Mother Lode country. Good luck!

 Shop for a drywasher here and enjoy FREE SHIPPING in the Lower 48 on $350 purchases!

Nugget of News Blog

Posted by: Denise AT 11:26 am   |  Permalink   |  1 Comment  |  Email
Facebook
Pinterest
Twitter
Add to favorites

Nugget of News Blog